EasyManua.ls Logo

Dwin TransVision 3 - Using Control Menus; Main Menu and Input Selection; Format and Video Adjustments

Default Icon
22 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
- 11 of 23
Input Option
From the Main menu scroll up or down to highlight the
Input option.
Use the left or right buttons to sequentially select the input
sources.
Or use the numbered buttons 1 through 0 on the remote control
for direct switching of inputs.
For composite video inputs, press 1 or 2; for S-Video inputs, press 3 or
4; for component video inputs, press 5, or 6; for RGB inputs, press 7
or 8; and for DVI inputs, press 9 or 0.
NOTE: The TransVision
3 saves the last active input in the memo
When the power is turned on the TransVision
3 will restore all t
settings and display the last active input as a current input.
1. Video 1
2. Video 2
3. S-Video 1
4. S-Video 2
5. Component 1
6. Component 2
7. RGB 1
8. RGB 2
9. DVI 1
0. DVI 2
Format Option
From the Main menu scroll up or down to highlight the
Format option. This enables to select the aspect ratio.
Use the left or right buttons to sequentially select the aspect
ratio.
Or use the numbered buttons 1, 2 or 3 on the remote control for
direct selection of Format.
To change formats without entering the Main Menu, Press the ALT
button and then the 1 button for Standard; for the Anamorphic
format press ALT and then 2; for Letterbox press ALT 3.
DWIN
®
TransVision
Input Video 1
Format Standard
Video
Setup
1. Standard
2. Anamorphic
3. Letterbox
Once a format is selected for a specific input, it will be entered into the system memory so that the
next time that input is selected; the same aspect ratio will appear.
NOTE: Format selection is only available for 480i, 580i, 480p or 580p signals. For 540p, 720p
and 1080i signals, the system will automatically select the 16:9 (HD) aspect ratio.
Video Control Menu
From the Main menu scroll up or down to highlight the Video option.
Use the left or right buttons to advance to the Video Control menu.
To quickly access the Video Menu, press either the up or down button.
DWIN
®
TransVision
Input Video 1 Video Controls
Format Standard Contrast 50
Video Brightness 50
Setup Color 50
Tint 50
Sharpness 5 Contrast 50