Dwin TransVision 3 - Setup Menu Options; Menu Timeout and Position

- 12 of 23
 Use the up ▲ or down ▼ buttons to select the desired video control option.
 Use the left ◄ or right ► buttons to adjust video settings.
Once you press the left ◄ or right ► buttons this menu will be replaced with a single line display at
the bottom of the screen. This allows you to see the picture while adjusting the control settings.
 To restore the full menu, press MENU.
Picture setting changes made with the Video menu are saved in memory for each of the ten video
inputs. Many video sources are different enough to require this fine-adjusting and these settings will
be recalled each time a video input is selected.
Setup Menu
 From the Main menu scroll up ▲ or down ▼ to
highlight the Setup option.
 Use the left ◄ or right ► buttons to advance to the
Setup Options menu.
Menu Timeout
Menu Position
Rename Inputs
Rename Formats
Screen Setup
Image Setup
Relay Setup
Power Setup
Lamp Hours
◄ 30 sec ►
►
►
►
►
►
►
►
►
Menu Timeout
This feature selects the length of time before the on-screen menus disappear from the screen.
 Use the left ◄ or right ► buttons to select 15, 30, 45 or 60 seconds.
Menu Position
This feature is to select the location of menus on the screen.
 Use the left ◄ button to move the menu to the left, right ► button to
the right, up ▲ button for the top and down ▼ button for the bottom
of the screen. The MENU will move one step with each press of the
selected arrow button or will move continuously when the selected
arrow button is held down.
Setup Options
DWIN
®
TransVision
™
▲
◄ Menu Position ►
▼