- 13 of 23
Rename Inputs
This feature is for changing Input Names which appear on the Main
menu. A default name is provided for each input such as Video 1.
Scroll up ▲ or down ▼ the default list to highlight a desired input.
Scroll the right ► cursor key to the first character in the highlighted
(right column) listing.
When the first character is highlighted (as shown), use the up ▲ or
down ▼ cursors to scroll through the alpha numeric options.
Rename Input
Video 1 Video 1
Scrolling up ▲ starts with the letter "A" and continues to the end of the alphabet followed by numbers
and punctuation marks. Scrolling down ▼ repeats the process in exactly the opposite order.
Choose a character for the first space
Then scroll right ► again and select the next character.
Each name has a maximum of eleven letters, numbers or spaces.
When you have completed renaming the first input, scroll left ◄ to exit the right column.
Scroll up ▲ or down ▼ the default list to repeat the process for all of the inputs you wish to
rename.
Rename Formats
The Formats refers to the aspect ratio of played video signal. For
example, a DVD player which is connected to the Y/B/R input may be
used to playback either Standard (4:3) format or Letterbox format. This
menu permits you to rename the formats. A default name is provided
for each format such as Standard, Letterbox or Anamorphic.
To enter a different name, use the cursor to highlight Rename
Formats and follow the same instructions as in the Rename Inputs
menu.
Rename Formats
Standard Standard
Screen Setup
The Screen Setup menu is used during projector installation to position
the projected image with the screen and to select the projection
mounting configuration.
Use the left ◄ or right ► buttons to select from Front Floor, Front
Ceiling, Rear Floor or Rear Ceiling configurations.
The selection process has a built-in delay to perform the function, so it
may appear to be slow during executing your selections.
Screen Setup
Mounting ◄Front Floor ►
To Next Page
Loading...