Dwin TransVision 3 - Remote Control Operation Guide; Device Selection and Power; Input and Menu Navigation; Aspect Ratio Settings

- 9 of 23
Quick Reference Remote Control Operation
CENTER SUR
GUIDE MENU
POWER
AUD CD TAPE AUX
SAT TV VCR CBL
TV
VOL CH
MUTE T/V
PAUSE
R
E
W
F
/
F
STOP
EXIT
PRE.
CH
DELAY -- DELAY +
1 2 3
4 5 6
7 8 9
FAV
SLEEP
INFO
PRO.L
NEXT
3.CH
ALT
TEST
+10 0 ENTER
----------pip------- SHIFT
TUNER CD TAPE1 TAPE2
PHONO
VCR1 VCR2/SAT LDP AUX TV
M1 M2 M3 M4
LIGHT
HOME THEATER MASTER
SL-8000
SEL
PLAY





The remote control provided with the TransVision
™
TransVision
™
3 is a universal remote control capable
of controlling eight different devices.
 Select TV device to control the TransVision
™
3.
 Press TV to turn the TransVision
™
ON.
 Press POWER to turn the TransVision
™
ON or OFF.
 Press MENU to display the Main menu, or to
return to the previous menu.
 Use the numbered buttons for direct switching
of inputs.
To select a specific input, press a numbered button.
For Press
Video inputs 1 or 2
S-Video inputs 3 or 4
Component inputs 5 or 6
RGB inputs 7 or 8
DVI inputs 9 or 0
 Press up ▲ or down ▼ to sequences through the
on-screen menu options.
 Press left ◄ or right ► to adjust values or to
move to a sub-menu.
 Press SEL to move to a sub-menu.
 Press EXIT to clear the on-screen menus.
 Press ENTER to perform a selected function.
 Press INFO to display the system status.
 Press ALT followed by a numbered button 1-3 to
select format. Applies only to multi format sources.
For Press
Standard (4:3) ALT 1
Anamorphic ALT 2
LetterBox ALT 3
The brand code for TransVision
™
3 is 177.