Dwyer Instruments LOVE CONTROLS 32A Series User Manual

Addr (Option 992, Serial Communications) Control Address: Set from 1 to 3FF. This number
(hexadecimal, base 16) must match the address number used by the host computer.
bAUd (Option 992, Serial Communications) Communication Baud Rate: Select 300, 1200, 2400,
4800, 9600, or 19200. This number must match the baud rate used by the host computer.
nAt (Option 992, Serial Communications) No Activity Timer: Set from OFF or 1 to 99 minutes.
1 - 99 Maximum time between host computer accesses. If timer counts to 0, CHEC/LorE
will be displayed.
OFF No Activity Timer function is disabled.
Stor (Option 992, Serial Communications) Store to EEPROM: Select
YES
or
no
.
(See additional information on page 18).
YES
Menu Items changes made through the Serial Communications are stored
directly to the EEPROM.
no
Menu items changes made through the Serial Communications are stored
directly in RAM.
When Stor is set to no, ArUP must be set to ON to make sure no memory is stored.
Page 31
NOTICE

Dwyer Instruments LOVE CONTROLS 32A Series Specifications

General

Brand	Dwyer Instruments
Model	LOVE CONTROLS 32A Series
Category	Control Unit
Language	English