Dwyer Instruments LOVE CONTROLS 32A Series User Manual

Page 17
SW5
OFF
ON
OFF
ON
OFF
ON
OFF
ON
S
W
6
O
F
F
O
F
F
O
N
O
N
O
F
F
O
F
F
O
N
O
N
SW7
OFF
OFF
OFF
OFF
ON
ON
ON
ON
Displayed Unit
0.01 s
0.1 s
1 s
min, 0.01 s
min, 0.1 s
0.1 min
min
hr, min, s
SW3
OFF
ON
OFF
ON
SW4
OFF
OFF
ON
ON
Counter
F
N
C
R
Timer
Signal ON Delay 1
Signal ON Delay 2
Signal OFF Delay
Signal ON
Output Mode Configuration
Tachometer
Lo-Lo
Lo-Hi
Hi-Lo
Hi-Hi
Table C: Timer Units of Measure
Table D: Output Mode Configurations
SPECIFICATIONS
Operating Temperature Range: 32 to 122°F (0 to 50°C).
Humidity Conditions: 35 to 85% RH (non-condensing).
Control Output Ratings: (Out 1) Relay: SPST 5A at 250 VAC, Transistor: NPN Open
collector 100 mA / 30 VDC residual voltage = 1.5 VDC max; (Out 2) Relay: SPST 5A at
250 VAC, Transistor: NPN Open collector 100 mA / 30 VDC residual voltage = 1.5 VDC
max.
Weight: 4 oz (114 g).
Reset Time: 0.001 seconds minimum.
Inputs: Dry contact, PNP, or NPN.
Timing Functions: 14 pre-programmed timing functions.
Supply Voltage: 100 to 240 VAC 50 / 60 Hz.
Power Consumption: Less than 10 VA.
Internal Power Supply: 12 VDC ±10%, 100 mA..
Display: Two-line 6 digit negative transmissive LCD display.
Agency Approvals: CE, UL.

Dwyer Instruments LOVE CONTROLS 32A Series Specifications

General

Brand	Dwyer Instruments
Model	LOVE CONTROLS 32A Series
Category	Control Unit
Language	English