To Next PageTo Next Page
Need help?Do you have a question about the Dwyer Instruments LOVE CONTROLS 32A Series and is the answer not in the manual?
General| Inputs | Thermocouple, RTD |
|---|---|
| Display | 4-digit, 7-segment LED |
| Output | 4-20 mA, Relay |
| Power Supply | 24 VAC/VDC |
| Operating Temperature | 0°C to 50°C (32°F to 122°F) |
| Memory Backup | Non-volatile memory |
| Control Mode | PID, On/Off |
| Control Action | Direct or Reverse |
| Approvals | CE, UL |
| Enclosure Rating | NEMA 4X (IP65) |
Details optional features like Serial Communication and power supply options.
Instructions for mounting the instrument in an enclosed panel.
Details wiring for optional inputs and outputs, including warnings about signal/power wiring.
Provides wiring diagram and instructions for 4 to 20mA transmitter inputs.
Explains the ramp/soak feature's approach to set point changes over time.
Details the steps for setting up the ramp/soak program segments and parameters.
Guides on how to start, suspend, and resume the ramp/soak program.
Explains how the Self Tune function calculates PID parameters.
Details setting up the Self Tune function and what to expect during operation.
Details setup, wiring, and parameters for serial communication.
Explains how to configure the second output for Set Point 2 or Alarm functionality.
