What to do if my DXG DXG-565V memory card cannot be used?
If your DXG Camcorder says the memory card cannot be used, it might be protected, so unlock it. Also, the memory card may contain non-DCF images taken by other cameras. In that case, format the memory card, but be sure to back up your files first.
Why my DXG DXG-565V cannot turn on?
If your DXG Camcorder won't turn on, the batteries may not be inserted correctly, so ensure they are properly inserted. Also, the batteries might be out of power, so try replacing them.
What to do if my DXG Camcorder suddenly turns off?
If your DXG Camcorder suddenly turns off, it could be because the power off function was enabled. In this case, turn the power on again. Alternatively, the camera might be running out of battery power, so replace the batteries.
What to do if my DXG DXG-565V Camcorder image is out of focus?
If the image from your DXG Camcorder is out of focus, it might be because the subject is beyond the focus range. Try taking the picture within the available focus range and choose normal or macro mode.
What to do if all buttons are inactive on my DXG Camcorder?
If all the buttons on your DXG Camcorder are inactive, a short circuit might have occurred when connecting the camera with other devices. Remove the batteries from the camera and insert them again.
What to do if my DXG DXG-565V turns off when capturing image using self-timer?
If your DXG Camcorder turns off when capturing an image using the self-timer, the camera is likely running out of battery power. Replace the batteries.
What to do if the captured image is not stored in memory of my DXG Camcorder?
If the captured image is not stored in memory on your DXG Camcorder, it could be because the power was cut off before the image was saved. When the battery indicator turns red, charge the battery immediately.
General
