Dymo LabelManager 120P User Manual

5
About Your New Label Maker
With the DYMO LabelManager 120P electronic label maker, you can create a wide
variety of high-quality, self-adhesive labels. You can choose to print your labels
in several different font sizes and styles. The label maker uses DYMO D1 tape
cassettes in widths of 9 mm or 12 mm. These tape cassettes are available in a
wide range of colors.
Visit www.dymo.com for information on obtaining labels and accessories for
your label maker.
Product Registration
Visit www.dymo.com/registration to register your label maker online.
Getting Started
Follow the instructions in this section to print your first label.
Connecting the Power
The label maker is powered by six high-
capacity AA alkaline batteries. To save
power, the label maker will automatically
turn off after two minutes of inactivity.
To insert the batteries
Slide the battery compartment cover 1.
away from the label maker. See Figure 2.
Insert the batteries following the polarity markings (+ and –).2.
Replace the cover.3.
x Remove the batteries if the label maker will not be used for a long
period of time.
Figure 2
LM120P manual UK_WEU.indd 5 01-08-2007 10:13:22

Dymo LabelManager 120P Specifications

General

Maximum resolution	180 x 180 DPI
Tape size	9 mm
Label memory	1 label(s)
Battery type	AA
Number of batteries supported	6
Underline	Yes
Tape cutting	Manual
Number of fonts	1