Dymo LabelManager 120P User Manual

8
LCD Display
You can enter up to 99 characters and spaces. The display shows about thirteen
characters at a time. The number of characters displayed will vary due to
proportional spacing.
With DYMO’s exclusive graphical display, most of the formatting you add is
visible instantly. For example, the border added to the text below is clearly
displayed.
Feature indicators along the top of the LCD display appear black to let you know
when a feature is selected.
Settings
The key displays the Label Width, Language, Units, and Contrast
submenus. These features are described later in this User Guide.
CAPS Mode
The key toggles capitalization on or off. When CAPS mode is turned on, the
CAPS mode indicator is shown on the display and all letters that you enter will
be capitalized. The default setting is CAPS mode on. When CAPS mode is off, all
letters appear in lower case.
Backspace
The 0 key removes the character to the left of the cursor.
LM120P manual UK_WEU.indd 8 01-08-2007 10:13:23

Dymo LabelManager 120P Specifications

General

Maximum resolution	180 x 180 DPI
Tape size	9 mm
Label memory	1 label(s)
Battery type	AA
Number of batteries supported	6
Underline	Yes
Tape cutting	Manual
Number of fonts	1