Dymo LabelManager 220P User Manual

19
Caring for Your Label Maker
Your label maker is designed to give you long and trouble-free service, while
requiring very little maintenance. Clean your label maker from time to time to keep
it working properly. Clean the cutter blade each time you replace the tape cassette.
To clean the cutter blade
Remove the tape cassette.1.
Press and hold down the cutter lever to 2.
expose the cutter blade. See Figure 6.
Use a cotton ball and alcohol to clean both 3.
sides of the blade.
èThe cutter blade is extremely sharp. Use
caution when cleaning.
To clean the print head
Remove the tape cassette.1.
Remove the cleaning tool from inside the tape compartment cover. 2.
Gently wipe the padded side of the tool across the print head. See Figure 6.3.
Figure 6
Print head Cutter button
LM220P-UK_WEU.indd 19 25-07-2007 14:45:18

Dymo LabelManager 220P Specifications

General

Print technology	Direct thermal
Maximum resolution	180 x 180 DPI
Tape size	6 mm
Label memory	9 label(s)
Print preview	Yes
Dimensions (WxDxH)	224 x 200 x 98 mm
Battery type	AA
Number of batteries supported	6
Tape type	D1
Number of fonts	1
Number of styles	7
Number of box types	8
Number of printing lines (max)	2