Dymo LabelWriter Print Server User Manual

Adding a Printer in Windows Vista
13
11 On the Type a printer name
page, do the following:
a. Enter a name for your
printer in the Printer
name field.
b. Select whether or not you
want to use this printer as
the default printer.
c. Click Next.
12 To print a test label, click
Print a test page.
13 Click Finish.
The printer is now available in
the printer list. For the
LabelWriter Duo, you now need to add the tape portion of the printer.
To add the Tape printer portion of the LabelWriter Duo printer
1 Repeat steps 1-7 in "To add a LabelWriter
printer" on page 11.
2 In the Configure Standard TCP/IP Port
Monitor dialog box, do the following:
a. Under Protocol, select Raw.
b. Under Raw Settings, enter 9102 in the
Port Number field.
c. Click OK.
3 On the Additional Port Information
Required page, click Next.
4 On the Install the printer
driver page, do the following:
a. Choose DYMO from the
Manufacturer list.
b. Choose DYMO
LabelWriter Duo Tape
from the Printers list.
c. Click Next.

Dymo LabelWriter Print Server Specifications

General

Networking standards	-
Network connection type	Ethernet LAN
Interface	USB
Customs code	8443321000
Network ready	Yes
Minimum system requirements	CD-ROM
USB 2.0 ports quantity	1
Package type	Box
Package depth	235 mm
Package width	175 mm
Package height	68 mm
Package weight	390 g
Internal	No
Country of origin	Taiwan
Mac operating systems supported	Mac OS X 10.3 Panther, Mac OS X 10.4 Tiger, Mac OS X 10.5 Leopard, Mac OS X 10.6 Snow Leopard, Mac OS X 10.7 Lion
Windows operating systems supported	Windows Vista Business, Windows Vista Business x64, Windows Vista Home Basic, Windows Vista Home Basic x64, Windows Vista Home Premium, Windows Vista Home Premium x64, Windows Vista Ultimate, Windows Vista Ultimate x64, Windows XP Home, Windows XP Home x64, Windows XP Professional, Windows XP Professional x64