12
1. Before cleaning, make sure the power has been turned off at the circuit breaker
panel and that the heating element of the heater is cool.
2. To maintain the external appearance of the heater, the unit occasionally needs to
be wiped with a dry duster. During the summer months, or at other times when
the appliance is not in use and is completely cold, it should be the wiped over
with a damp cloth.
3. Do not use abrasive cleaning powders or furniture polish. Do not use chemical or
abrasive products, metallic scourers and so on, which may deteriorate the sur-
face, to clean the appliance.
4. During the summer months, or at other times when the appliance is not in use,
disconnect the power supply. Keep the appliance in a dry and cool place.
5. All other servicing should be performed by qualied service personnel. Do not try
to repair the heater yourself.
NOTE: The motor is permanently lubricated, and no further lubrication is needed.
MAINTENANCE
REPLACEMENT PARTS
Part Description Part#
1 Back mesh EG5000001AC
2 Hanging plate EG5000002AC
3 Fan Blade EG5000003AC
4 Air guide plate EG5000004AC
5 Large handle seat EG5000005AC
6 Small handle seat EG5000006AC
7 Spring EG5000007AC
8 Motor
EG5000008AC-DGC
Part Description Part#
9 Heater EG7500001AC
10 Selection Switch EG5000011AC
11 Thermostat EG5000012AC
12 Knob EG5000013AC
13 Terminal block
EG5000014AC-DGC
14 Temperature CUT-OFF EG5000017AC
15 Caution Indicator (Red) EG5000018AC
16 Power Indicator (Yellow) EG5000019AC
17 AC Contactor EG7500002AC
To Next Page
Loading...
