Need help?Do you have a question about the Dynacord PCL 1245 and is the answer not in the manual?
General| Type | Power Amplifier |
|---|---|
| Channels | 2 |
| 8 Ohms Stereo (per channel) | 450 W |
| THD | < 0.05% |
| SMPTE-IMD | < 0.1% |
| S/N Ratio | > 100 dB |
| Damping Factor | > 300 |
| Input Sensitivity | 0 dBu / 0.775 V |
| Frequency Response | 10 Hz - 40 kHz |
| Weight | 15 kg |
| Signal-to-Noise Ratio | > 100 dB |
| Total Harmonic Distortion | < 0.05% |
| Input Impedance | 20 kOhm |
| Cooling | Forced air |
To Next Page
