Dynacord PSX 1250 User Manual

fcjtsS,^
IMPORTANT NOTES
TABLE OF CONTENTS
PSX 1250-GENERAL OVERVIEW. 3
INPUT/MONO. 4
INPUT/STEREO. 6
MASTER. 8
TAPE. 9
MONITOR. 10
LINE. 11
EFFECT 1. 12
EFFECT 2. 13
SPECIFICATIONS. 16
SERVICE. 19
\
IMPORTANT NOTES
CAUTION: The unit must be protected from humidity to prevent the risk of
fire or electric shock.
1. Make sure that you have the correct mains voltage. Only operate with the
unit with the mains voltage marked on the rear panel.
2. Ensure that no objects (in particular metal objects) are inserted into the
unit. This could cause severe electric shock or give rise to malfunction.
3. If the unit is suddenly moved from a cold place to a warm place, e.g.
transporting from outside into a heated room, condensation will occur. In
this case you should not switch the unit on until it has warmed up to room
temperature.
4. In the event of water or any other fluid being accidentally spilt on the unit,
switch the unit off immediately and send it to a qualified service workshop
for inspection.
5. Always ensure that the unit is well ventilated and never exposed to direct
sunlight.
6. Do not use sprays to clean the unit as these may cause damage to it and
could suddenly ignite.
V___ )

Dynacord PSX 1250 Specifications

General

Brand	Dynacord
Model	PSX 1250
Category	Music Mixer
Language	English