Dynacraft Realtree User Manual

16
12. POWER SUPPLY
CONNECTION
NOTE: The battery is disconnected for shipment
to prevent the battery from draining.
• Securely plug the battery connector into
the control module connector.
Control
Module
Connector
Battery
Connector
Battery
13. SEAT INSTALLATION
• Find Seat Back that marked “6” on its
back, also find the Seat Bottom marked
“7” on its back.
• Locate the Seat Back on the ground and
insert the Seat Bottom into the Seat Back
as shown.
NOTE: Gently insert the Seat Bottom tabs into
the corresponding Seat Back slots and push
to hear the Seat Bottom click into place. Once
the tabs clicks into place, it cannot be pulled
out without damaging the seat.
• Hook the clips (in the back of the seat) up
into the slots in the ride-on toy body, then
click the seat into the ride-on toy body.
• Tighten the seat with two M5x16 mm
machine screws.
ClipsClips
Seat Bottom
Seat Back
7
6
M5x 16 mm
Machine Screw

Dynacraft Realtree Specifications

General

Brand	Dynacraft
Model	Realtree
Category	Motorized Toy Car
Charging Time	8-12 hours
Battery	12V
Features	Working headlights, horn, and MP3 player connection
Recommended Age	3+
Color	Camo
Material	Plastic