Installation, Operation and Service Manual LKP Series
© 2020 DynAmp, LLC Page 31
041736 N
6.4 SPARE PARTS ORDERS - ROUTINE OR EMERGENCY
Requests for spare parts should be directed to "Service" at DynAmp, LLC during normal
hours. When contacting us, please present as much information as possible, such as the
related equipment Model and Serial Numbers (available on the equipment tag); the
required part name; its DynAmp, LLC item number (and other identifying or vendor
number(s); and your time needs. An approved Purchase Order Number should be given
with your order.
6.5 RECOMMENDED SPARE PARTS
The following table lists the minimum recommended quantities* for spare parts for the LKP
Series 6 & 8 Channel. As spares are used, replacements should be ordered. Since
continuous operation of high-current measurement systems is usually critical, stocking
spare parts should be given high priority.
A single module “A” kept on hand (see part number below) can be used to replace either of
the modules in the Metering Unit and guarantee quick, error free repair. Note that a
module “B” cannot be used to replace a module “A” but the reverse is true.
The LKP Series Measuring Heads require special repair procedures and materials.
However, the heads are very reliable and should require little or no repair over its service
life. Please refer to the nearest authorized DynAmp service center for information on
repairs.
To Next Page
Loading...