Dynapac CA250 User Manual

Introduction
W3023EN3.pdf2010-04-16
Introduction
Warning symbols
WARNING ! Marks a danger or a hazardous
procedure that can result in life threatening or
serious injury if the warning is ignored.
WARNING ! Marks a danger or a hazardous
procedure that can result in life threatening or
serious injury if the warning is ignored.
CAUTION ! Marks a danger or hazardous
procedure that can result in damage to the
machine or property if the warning is ignored.
CAUTION ! Marks a danger or hazardous
procedure that can result in damage to the
machine or property if the warning is ignored.
Safety information
Ensure good ventilation (extraction of air by fan)
where the engine is run indoors.
Ensure good ventilation (extraction of air by fan)
where the engine is run indoors.
General
- Familiarize yourself with the equipment on the
machine.
- Only operate the machine if you are familiar with how
the controls work and how the machine functions.
- Use your safety equipment such as helmet,
protective shoes and hearing protection.
- Familiarize yourself with the machine's area of work.
- Only use the machine for its intended purpose.
The safety manual supplied with the machine
must be read by all roller operators. Always
follow the safety instructions. Do not remove
the manual from the machine.
The safety manual supplied with the machine
must be read by all roller operators. Always
follow the safety instructions. Do not remove
the manual from the machine.
1

Dynapac CA250 Specifications

General

Drum Width	2130 mm
Drum Diameter	1500 mm
Centrifugal Force	190 kN
Vibration Frequency	28 Hz
Amplitude	1.9 mm