9CC102/C/122/C/132/142/C M102EN4
Items Action See page Comments
in fig. 1
4 Check indicator on air cleaner 16
Check that pneumatic hoses are intact
and connections are tight 16
15 Grease the steering joints 17
16 Grease the steering cylinder brackets 17
19 Check the tire pressure (combo) 17
After the first 50 hours of operation, change all the oil filters and oil,
except the hydraulic fluid.
Items Action See page Comments
in fig. 1
The periodic measures are intended to be performed
primarily with the specified hours of operation,
secondarily for the periods: daily, weekly, etc.
Remove all dirt before filling, when checking
oils and fuel, and when lubricating with oil or
grease.
The manufacturer’s instructions noted in the
engine manual also apply.
Every 50 hours of operation (Weekly)
Every 10 hours of operation (Daily)
MAINTENANCE MEASURES
Before starting up
6 Check oil level in the engine See engine instruction manual.
14 Check the hydraulic reservoir level 11
3 Check coolant level, (Isuzu) 11
3 Check for free circulation of cooling air 12
1 Refuel 12
7 Fill the water tank 12
8 Inspect the sprinkler system/Drum 13
9 Inspect the scraper setting/Drum 14
21 Inspect spring-action scrapers 14 Optional
20 Inspect the sprinkler system/Tires 14
21 Inspect the scraper setting/Tires 15
23 Test the brakes 15
To Next Page
Loading...
Need help?
General
