EasyManua.ls Logo

Dynapac CC122C - Transportation and ROPS; Securing the Roller for Transport

Dynapac CC122C
35 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
26 CC102/C/122/C/132/142/C M102EN4
Push the parking brake knob.
Switch off the engine and open the left door of the
engine compartment.
Release the hose clamps (2) with a screwdriver.
Discard the pre-filter (1) in a safe manner, it is
not reusable and cannot be cleaned.
Fit a new pre-filter and tighten the hose clamps again.
Start the engine and check that the pre-filter does not
leak.
Make sure that ventilation (extraction) is
adequate if the engine is run indoors. Risk
of carbon monoxide poisoning.
EVERY 1000 HOURS OF OPERATION (Every six months)
Changing the engine
pre-filter (Deutz)
1
2
Fig. 42 Engine compartment
1. Pre-filter
2. Hose clamps

Other manuals for Dynapac CC122C

Related product manuals