EasyManuals Logo

Dynapac CC122C Maintenance Manual

Dynapac CC122C
35 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #30 background imageLoading...
Page #30 background image
28 CC102/C/122/C/132/142/C M102EN4
Water tank – Draining
1
Fig. 46 Pump system
1. Water filter
Water pump – Draining
Fig. 47 Pump system
1. Water pump
2. Drain cock
Open the drain cock (2) to empty the water pump (1).
Water tank – Cleaning
Fig. 48 Water tank
1. Drain plug
1
EVERY 2000 HOURS OF OPERATION (Yearly)
Clean the tanks with water and a suitable detergent for
plastic surfaces.
Refit the filter housing or the drain plug (1), fill with
water and check for tightness.
The water tanks are made of recyclable
plastic (polyethylene).
1
2
Remember the risk of freezing during the
winter period and drain the tank, pump and
leads.
The easiest way to empty the water tank is to open the
drain cock on the water filter (1).
(There is also a drain plug underneath the water tank).

Other manuals for Dynapac CC122C

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Dynapac CC122C and is the answer not in the manual?

Dynapac CC122C Specifications

General IconGeneral
BrandDynapac
ModelCC122C
CategoryConstruction Equipment
LanguageEnglish

Related product manuals