Electromagnetic Compatibility
Where applicable, this equipment is designed to comply with International
Electromagnetic Compatibility (EMC) standards.
To ensure reproduction of this EMC performance, connect this equipment to a low
impedance ground connection. Typical suitable connections are a ground spike or the
steel frame of a building.
Proprietary Rights Notice
This document and the information that it contains are the property of Instron
Corporation. Rights to duplicate or otherwise copy this document and rights to disclose
the document and the information that it contains to others and the right to use the
information contained therein may be acquired only by written permission signed by a
duly authorized officer of Instron Corporation.
© Copyright 1999 Instron Corporation
Revision A
To Next Page
Loading...