Dynaudio Focus 60 XD - Page 12

Owner’s Manual Focus XD
2322
dynaudio.com/focusxd
Display meanings
LED DISPLAY MEANINGS
Hub or Connect connection
The bottom LED is ashing red. There is no active Hub or Connect, or no
connection to a Hub or Connect possible
Switch-on process
LEDs are illuminated one by one. The loudspeaker is being switched on.
Switch-off process
The LEDs go out one by one.
In the nal state, only one LED is
illuminated dimly in red.
The loudspeaker is being switched off.
Displaying the direct input
One of the two LEDs ashes.
LED 1 = digital INPUT
LED 2 = analog INPUT
LED DISPLAY MEANINGS
Displaying the selected Hub or Connect
One of the three LEDs ashes. LED 1 = HUB A
LED 2 = HUB B
LED 3 = HUB C
Displaying the input source
One of the four LEDs ashes. LED 1 = INPUT 1
2nd LED = INPUT 2
3rd LED = INPUT 3
4th LED = INPUT 4
Searching for an input
The blue LED ashes; the lights in the
white LEDs move back and forth.
Searching for an active input
Searching for an active input on the hub
The blue LED ashes, the white LEDs
briey light in order. A hub input has been selected and the hub is
searching for an active input.