Safety instructions / About this guide
Safety
instructions
About this
guide
High sound pressure levels
Listening to high sound pressure levels over a longer period
of time may harm your hearing.
Dangerous electrical voltage
If the loudspeakers are connected to the mains voltage, a
dangerous electrical voltage is present inside the speakers.
To avoid auditory effect, do not listen to high sound levels over a longer period of time.
Never open the loudspeaker housing.
Do not operate defective loudspeakers and disconnect defective loudspeakers from
the mains voltage. Please contact your Dynaudio distributor if you have any problems.
Distributor addresses can be found in the Internet at www.dynaudio.com.
Use the supplied power cable to connect the loudspeakers to the mains voltage. Make
sure that the power supply cable is not damaged; exchange it for a new one if it has
been damaged.
Used expressions and symbols
In this operating manual following signs and symbols are used:
ATTENTION: Indicates a hazard that could result in damage or destruction of the product.
The exclamation point within an equilateral triangle is intended to alert the user to the
presence of important operating and maintenance (servicing) instructions in the literature
accompanying the product.
Indicates (in combination with a safety sign) a potentially hazardous situation which, if not
avoided, could result in minor or moderate injury or damage to equipment.
Indicates a hazard that could result in death or severe injury.
The arrow will identify steps to be performed. Please follow the instructions carefully.
Always make sure to follow the instructions given in these passages.
Multiple steps that should be performed consecutively are numbered.
Please follow these instructions carefully.
1.
2.
Note
Additional information is provided, which is important to fully understand the
loudspeaker and how to operate it.
To Next Page
Loading...
