Dynaudio Xeo 10 - Initial Speaker Setup and Placement; Dynaudio Xeo Input and Output Options

2524
Dynaudio Xeo 10/20/30 Connection options
Your signal source Signal source
output
Xeo10/20/30
input*
Cable
(source – Xeo10/20/30)
Notes
Notebook, Mac™, PC
Optical* Optical In Toslink – Toslink
* If available
Line out Line in RCA – RCA
Headphones Aux in Jack 3.5 mm – 3.5 mm
Smartphone, other portable devices Headphones Aux in Jack 3.5 mm – 3.5 mm –
Astell&Kern
Headphones Aux in Jack 3.5 mm – 3.5 mm
–
Optical Optical In Toslink – Toslink
PonoPlayer Jack Aux in Jack 3.5 mm – 3.5 mm –
Docking station, network client,
Sonos, Bluesound, etc.
Line out Line in RCA – RCA
* If available
Optical* Optical In Toslink – Toslink
Google Chromecast Audio
Line out Aux in Jack 3.5 mm – 3.5 mm
Select a variant.
Optical Optical In Mini Toslink – Toslink
Apple AirPort Express Optical Optical In Mini Toslink – Toslink –
Apple TV* Optical Optical In Toslink – Toslink * up to 3
rd
generation
Hard disk, network player,
CD player
Line out Line in RCA – RCA
* If available
Optical* Optical In Toslink – Toslink
Analog radio, digital radio
Line out Line in RCA – RCA
* If available
Optical* Optical In Toslink – Toslink
Analog record player Line out* Line in RCA – RCA * On phono preamplier
TV
Headphones Aux in Jack 3.5 mm – 3.5 mm
Select a variant.
Line out Line in RCA – RCA
Optical* Optical In Toslink – Toslink
* If available
Stereo preamplier Pre-out, main out Line in RCA – RCA
–
Stereo power amplier
Tape out Line in RCA – RCA
* Disconnect bridge
Pre-out, main out* Line in RCA – RCA
Second pre-out Line in RCA – RCA
Subwoofer Analog output Line in RCA – RCA
–
AV receiver, AV processor
Optical Optical In Toslink – Toslink
–
Pre-out, main out Line in RCA – RCA
Connection options
► Connect your signal source to the appropriate input on the Xeo10/20/30 speaker.
► Following table gives a selection of signal sources and options for connecting to the Xeospeaker.