Dynex DX-24LD230A12 User Manual (English)

Other manuals for Dynex DX-24LD230A12

Guía Del Usuario54 pages

Guide De L'Utilisateur54 pages

Quick Setup Guide2 pages

Guide D'Installation Rapide2 pages

Guía De Instalación Rápida2 pages

Specification Sheet1 page

Questions and Answers:

L
Lee HughesSep 6, 2025
What to do if one or more channels do not display on Dynex TV DVD Combo?
- J
  James BrownSep 6, 2025
  If one or more channels do not display on your Dynex TV DVD Combo, check the following: * Make sure that the channels are not blocked. * Make sure that the channels are not hidden. The channel may have been deleted from the channel list. You can tune to the channel by pressing the number buttons or you can add the channel back to the channel list. * If you are using a cable or satellite box, use the remote that came with that box to change channels. * Make sure you have the correct input selected to view channels from the cable or satellite box. * If you are using an antenna, the digital channel signal may be low.
L
Laura FranklinSep 5, 2025
What to do if Dynex TV DVD Combo keeps turning off?
- S
  scott55Sep 5, 2025
  If your Dynex TV DVD Combo keeps turning off, make sure that the sleep timer is not turned on.
T
Taylor GarrisonAug 23, 2025
Why is there no picture and no sound on my Dynex DX-24LD230A12 TV DVD Combo?
- N
  nyuAug 23, 2025
  If your Dynex TV DVD Combo shows no picture (screen is not lit) and produces no sound, try the following: * Press on the TV/DVD combo or the remote control. * Ensure the video cables are securely connected to the back of your TV/DVD combo. * Adjust the contrast and brightness. * Verify the power cord is plugged in. * Select the correct video input source. * Try another channel to rule out station issues. * Confirm the incoming signal is compatible. * Check that the antenna or cable TV is connected correctly and securely. * Review the closed caption settings, as some TEXT modes can block the screen.
C
Courtney JonesSep 3, 2025
What causes double images on Dynex TV DVD Combo?
- M
  Mr. James MurphySep 3, 2025
  If you're seeing double images on your Dynex TV DVD Combo, use a highly directional outdoor antenna, cable TV, or satellite TV.
D
Douglas AlexanderSep 2, 2025
How to fix audio noise on Dynex DX-24LD230A12?
- T
  Terri StevensSep 3, 2025
  If you are experiencing audio noise with your Dynex TV DVD Combo, other devices (for example, surround sound receiver, external speakers, fans, or hair dryers) may be interfering with your TV. Try turning off one device at a time to determine which device is causing interference. Once you have determined which device is causing interference, move it further from the TV/DVD combo to eliminate the interference.
S
Shirley WhiteSep 1, 2025
Why is the picture on my Dynex DX-24LD230A12 poor?
- A
  Anna MontoyaSep 1, 2025
  If the picture quality on your Dynex TV DVD Combo is poor, consider the following: * Ensure the room isn't too bright, as light reflecting off the screen can make the picture difficult to see. * If you have an S-VHS camera or camcorder connected while another device is on, it may degrade the picture. Try turning off one or more devices to see if the picture improves.
Y
ymunozAug 31, 2025
Why does my Dynex TV DVD Combo only show snow on the screen?
- R
  Rebecca MorrisonSep 1, 2025
  If your Dynex TV DVD Combo only shows snow (noise) on the screen, try the following: * Try another channel to rule out station problems. * Make sure that the antenna or cable TV is connected correctly and securely. * If you are using an antenna, the digital channel signal may be low. To improve reception, adjust the antenna or use a highly directional outdoor antenna or set-top antenna with a built-in amplifier.
N
natalie41Aug 28, 2025
What to do if the picture on my Dynex DX-24LD230A12 does not fill the screen?
- W
  wmolinaAug 29, 2025
  If the picture on your Dynex TV DVD Combo does not fill the screen and there are black bars around the picture, change the aspect ratio. An increasing amount of digital TV and movies are presented in wide screen (16:9).
A
alexandra48Aug 28, 2025
Why does my Dynex DX-24LD230A12 show a 'No signal' error message?
- E
  Elizabeth Colon DVMAug 28, 2025
  If your Dynex TV DVD Combo displays a “No signal” error message: * Press INPUT and make sure that you have selected the correct input for the device or service you are trying to use. * If you are using a cable or satellite box, use the remote that came with that box to change channels.
B
Brianna HutchinsonAug 27, 2025
Why is there no color or a dark picture on my Dynex DX-24LD230A12?
- E
  Edward DiazAug 27, 2025
  If your Dynex TV DVD Combo displays no color, a dark picture, or incorrect color, try the following: * Try another channel to rule out station issues. * Adjust the color saturation. * Ensure the video cables are correctly and securely connected to the back of your TV/DVD combo. * Verify the antenna or cable TV is connected correctly and securely. * If you're using an antenna, check the digital channel signal strength. If it's low, adjust the antenna or use a highly directional outdoor or set-top antenna with a built-in amplifier.

Dynex DX-24LD230A12 Specifications

General

Screen Size	24 inches
Resolution	1366 x 768
Display Type	LED
DVD Player	Yes
HDMI Ports	2
USB Port	1
Audio Output	2 x 5W
Refresh Rate	60Hz
Display Technology	LCD
HDMI Input	2
USB Input	1
Built-in Tuner	Yes