Why I cannot tune to one or more channels on my Dynex LCD TV?
If you cannot tune to one or more channels on your Dynex LCD TV, make sure that the channels are not blocked by parental control settings.
Why does my Dynex LCD TV cabinet creak?
When you are using your Dynex LCD TV, the temperature inside the cabinet increases. This causes the cabinet to expand or contract, causing the creaking noise. This is not a malfunction.
General| Screen Size | 40 inches |
|---|---|
| Display Type | LCD |
| Resolution | 1920 x 1080 |
| Refresh Rate | 60 Hz |
| HDMI Inputs | 3 |
| USB Ports | 1 |
| Component Video Input | 1 |
| Composite Video Input | 1 |
| VGA Input | 1 |
| Aspect Ratio | 16:9 |
| Contrast Ratio | 1000:1 |
| Brightness | 300 cd/m² |
| Response Time | 8 ms |
| Viewing Angle | 178 degrees |
| Inputs | HDMI, USB, Component, Composite, VGA |
| Audio Output | Optical, RCA |
To Next Page
