IFC22906 www.powercommander.com 13-15 Yamaha YZF-R125 - PCFC - 4
FIG.D
FIG.E
FIG.F
7 Using the supplied Posi-tap attach the GREY wire of
the PCFC to the stock YELLOW wire of the bike’s
Throttle Position Sensor (Fig. F).
8 Reconnect the TPS connector back onto the throttle
body.
9 Reinstall bodywork.
PCV
6 Unplug the stock Throttle Position Sensor connector (Fig. E).
This connector is on the left side of the throttle body. This allows easier access
for step 7.
5 Plug the PCFC in-line of the stock injector and wiring harness (Fig. D)
Stk
Stk
PCV
To Previous Page
Loading...
