Dynojet Power commander FC User Manual

2007-2014 Honda SH300i - 1IFC16901 www.powercommander.com
Installation Instructions
PLEASE READ ALL DIRECTIONS BEFORE STARTING INSTALLATION
THE IGNITION MUST BE TURNED
OFF BEFORE INSTALLATION!
YOU CAN ALSO DOWNLOAD THE PCFC
CONTROL CENTER SOFTWARE AND
LATEST MAPS FROM OUR WEB SITE AT:
www.powercommander.com
2191 Mendenhall Drive North Las Vegas, NV 89081 (800) 992-4993 www.powercommander.com
2007-2014 Honda SH300i
1 Power Commander FC
1 USB Cable
1 Installation Guide
2 Dynojet Decals
2 Velcro
1 Alcohol swab
1 Posi-tap
Parts List

Dynojet Power commander FC Specifications

General

Brand	Dynojet
Model	Power commander FC
Category	Motorcycle Accessories
Language	English

Summary

Power Commander FC Installation

Parts List

List of components included with the Power Commander FC for the Honda SH300i.

Pre-Installation Safety and Preparation

Critical warnings and instructions to follow before starting the installation process.

Physical Installation Procedure

Step-by-step guide for physically installing the Power Commander FC unit onto the motorcycle.

PCFC Configuration and Operation

Selecting Map Positions

Instructions on how to use the map select dial to toggle between loaded maps.

Using RPM Range Dials

Guide to adjusting fuel +/- 10% based on engine RPM ranges.

Using PCFC Control Center Software

Steps to download, install, and connect the PCFC Control Center software.

Loading Additional Maps

Procedure for connecting the PCFC to a computer and sending new maps.

Altering Maps Using Software

Explanation of how to fine-tune fuel curves using the PCFC software.

Closed Loop Area Control

Understanding Closed Loop Operation

Details on how the PCFC manages the stock closed loop area and the target AFR.