Dynojet Power Commander 3r User Manual

Dynojet Research
2191 Mendenhall Drive
North Las Vegas, NV 89031
1-800-992-4993
2002 GSX1300R Hayabusa
PCIII/PCIIIr
Parts List
1 Power Commander 312-210
1 CD-ROM 152-23000
1 Installation Guide I312-211
Floppy Disc Request Form
If you do not have a CD-Rom drive and would like to
receive the program and the alternate maps for your model
on a 3 1/2” floppy disc, please fax this form to Dynojet at
1-702-399-1431 or call 1-800-992-4993
Bike Model
Name
Street
Town
State Zip
You can also download the Power Commander software
and the latest maps from our web site at :
www.powercommander.com

Dynojet Power Commander 3r Specifications

General

Brand	Dynojet
Model	Power Commander 3r
Category	Motorcycle Accessories
Language	English

Summary

Floppy Disc Request Form

Parts List

Installation Instructions for 2002 GSX1300R Hayabusa

Remove Seats

Remove the main seat and the passenger seat before starting installation.

Lift Fuel Tank

Lift the front of the fuel tank using the provided prop rod.

Disconnect Injector Connector

Locate and unplug the white connector from the injector rail.

Connect PCIII to Wiring Harness

Plug the PCIII connectors in-line with the stock wiring harness.

Route PCIII Wiring

Route the PCIII wiring along the inside of the frame towards the battery.

Connect Ground Wire to Battery

Attach the PCIII ground wire to the negative terminal of the battery.

Mount PCIII Unit

Mount the PCIII in the trunk using supplied velcro after cleaning surfaces.

Install PCIIIr Ignition Adjustment

Connect PCIIIr ignition adjustment to the generator cover connector.

Secure Fuel Tank

Bolt down the fuel tank, ensuring the fuel line does not kink.

Reinstall Seats

Reinstall the main and passenger seats to complete the installation.

Trouble Shooting

Common Operation Issues

Addresses common issues like lights not turning on, upload/download failures, and saving notes.

Adjustment Settings Issues

Troubleshooting problems with on-board adjustment buttons not holding settings.

Adjusting Your Power Commander

Adjusting with Power Adaptor

Instructions for adjusting the Power Commander using the face plate buttons with a Power Adaptor.

Adjusting Without Power Adaptor

Instructions for adjusting the Power Commander using face plate buttons without a Power Adaptor.