Dynojet POWER COMMANDER User Manual

18-023 www.powercommander.com 17-18 RC/Duke 390 - PCV - 1
Installation Instructions
PLEASE READ ALL DIRECTIONS BEFORE STARTING INSTALLATION
THE IGNITION MUST BE TURNED
OFF BEFORE INSTALLATION!
THE LATEST POWER COMMANDER
SOFTWARE AND MAP FILES CAN BE
DOWNLOADED FROM OUR WEB SITE AT:
www.powercommander.com
2191 Mendenhall Drive North Las Vegas, NV 89081 (800) 992-4993 www.powercommander.com
PARTS LIST
1 Power Commander
1 USB Cable
1 Installation Guide
2 Power Commander Decals
2 Dynojet Decals
2 Velcro strips
1 Alcohol swab
2 Zip ties
2017-2018 KTM 390 Duke
2017-2018 KTM RC390

Dynojet POWER COMMANDER Specifications

General

Brand	Dynojet
Model	POWER COMMANDER
Category	Motorcycle Accessories
Language	English

Summary

Power Commander V Input Accessory Guide

Accessory Inputs

Details how to connect various external accessories like map switches, quickshifters, and sensors to the PCV.

Wire Connections

Explains the physical process for connecting input wires to the Power Commander V unit.

Installation Preparation

Initial Motorcycle Disassembly

Guide to removing motorcycle body panels, fuel tank, and battery for PCV installation access.

Power Commander V Wiring

Ignition Coil and TPS Connections

Details unplugging and in-line connection of the PCV to the stock ignition coil and Throttle Position Sensor.

Fuel Injector and Crank Sensor Connections

Fuel Injector and Crank Position Sensor Wiring

Describes unplugging and in-line connection of the PCV to the fuel injector and crank position sensor.

Final Installation and Reassembly

PCV Grounding and Reassembly

Instructions for connecting the PCV ground wire, securing the unit, and reinstalling motorcycle bodywork.