Dynojet Power commander FC - Closed Loop Area Control; Understanding Closed Loop Operation

IFC16901 www.powercommander.com 2007-2014 Honda SH300i - 5
The PCFC for this model controls the stock closed loop area. This area is
represented by the highlighted cells shown in Figure G. The PCFC is designed to
achieve a target AFR of 13.6:1. To use this PCFC you must retain your stock O2
sensor.
It is not recommended to alter the values in the highlighted area unless instructed to
do so by a PCFC technician.
The closed loop range can be adjusted from the PCFC software by going to
Device Tools >Closed Loop Adjustment. In this window you can use the slider
bars to enrichen/lean the closed loop range. We do not recommend an adjustment
beyond +/- 20.
FIG.G