QEM15 www.powercommander.com 2009-2012 Yamaha R6/R1 - 2
1 Remove the main seat and the passenger seat.
2 Lift the fuel tank up or remove.
3 Mount the QEM in the tail section using the supplied velcro. Make sure to
clean both surfaces with the alcohol swab before attaching.
4 Remove the 4 bolts the hold the battery bracket and run the QEM harness
underneath it on the left side (Fig. B)
5 Unplug the 6 pin CLEAR connector that is behind the airbox on the left side
(Fig. C).
FIG.A
FIG.C
FIG.B
To Next Page
Loading...
