Messages and Alerts
9-8 SkyView SE Pilot’s User Guide - Revision B
Spoken Alert (if
configured)
Message Displayed
in Message
Window
Notification
Area Alert
(severity)
The COM radio control panel is no
longer communicating with
SkyView SE.
The COM radio transceiver
module Is no longer
communicating with SkyView SE.
The Knob Control Panel is no
longer communicating with
SkyView SE.
A previously connected backup
battery is no longer detected or
has failed.
While in flight, IAS has become
invalid (likely due to icing or
obstruction), and all GPS sources
have failed. The attitude
indication should be considered
unreliable.
The display internal temperature
is high. To prevent permanent
damage, the display may shut
down at any time unless
immediate action is taken to cool
it down.
The ROTAX engine has informed
SkyView SE there is a problem
with the engine.
The ROTAX engine has informed
the SkyView SE EMS-221 there is a
significant problem with the
engine.
The optionally-configured fuel
tank timer has reached its pre-
configured time or fuel quantity
consumption limit.
The external Level Button is stuck
and is inoperative.