Fitting notes
Service manual
Duct assembly replacement - dismantle
123 Remove the entry seal from the
duct assembly.
124 Remove the exhaust seal from
the duct assembly.
125 Undo the three screws shown on
the underside of the duct.
48
Before continuing the following parts should be removed as previously shown:
Motor and yoke assembly (Pages 5 - 11)
Stabiliser and pedal assembly (Pages 28 - 29)
Valve wheel (Page 33)
Valve hose assembly (Page 34)
Valve hatch assembly (Pages 37 - 38)
Switch and powercord assembly (Pages 40 - 42)
To Next Page
Loading...
