Dyson purifier cool Gen1 User Manual

Power and continuous monitoring
Stand-by on/off
Continuous monitoring
Press the Standby on/off button on your Dyson purifying fan or remote
control to stop your machine. It will continue to monitor the air quality.
Continuous monitoring is turned off by default. Once turned on,
it will always be active until you turn it off again.
With continuous monitoring turned on, your Dyson purifying fan will gather
particulate matter information, which is displayed on the LCD screen.
Continuous monitoring
Press and hold the Auto mode button on the remote control for 5 seconds
to turn it on. The LCD screen will indicate when continuous monitoring
is on or off.

Dyson purifier cool Gen1 Specifications

General

Airflow	290 l/s
Air speed	1.2 m/s
Cord length	1.8 m
Sleep timer	Yes
Air purify rate	- m³/h
Number of speeds	10
Oscillation angle	350 °
Air purifiers functions	Fan, Heating
Noise level (low speed)	42.6 dB
Noise level (high speed)	61.4 dB
Timer duration (maximum)	8 h
Timer duration (minimum)	1 h
Suitable for room area up to	27 m²
Package depth	260 mm
Package width	257 mm
Package height	1103 mm
Package weight	6850 g
Battery type	CR2032L
AC input voltage	220 - 240 V
AC input frequency	50 Hz
Power consumption (max)	- W
Power consumption (standby)	1 W
Fine particle (PM2.5) numeric reading range	12 µg/m³
HEPA class	HEPA 13
Filter life (max)	12 month(s)
Display type	LED
Product color	White

Weight and Dimensions

Depth	120 mm
Width	204 mm
Height	1050 mm
Weight	4730 g
Remote control weight	25 g
Remote control dimensions (W x H x D)	32.2 x 10.49 x 90 mm