Auto mode
Oscillation
Press the Oscillation button to circulate the air around the room and scroll
through the oscillation settings from 0°to 350°.
Airflow speed
Press the Airflow speed button to increase and decrease the airflow speed.
Set your Dyson purifying fan to Auto mode and the on-board sensors will
intelligently adjust the settings of the machine according to the air quality.
Air quality: your machine will pause when the target air quality has been
reached, switching on again when the air quality levels drop.
Airflow speed: the airflow speed will increase until the target air quality
has been reached.
In Night mode, your Dyson purifying fan will continue to monitor and
respond to changes, but only using its quietest settings – and with its
LCD screen dimmed.
Press the Night mode and Sleep timer button to scroll through the
timer options.
Night mode and Sleep timer
The remote control with
the oscillation button
on the bottom left.
The remote control
with the Airflow speed
toggle button on the
left hand side, in the
middle.
The remote control with
the Auto mode button
above the Night mode
button on the top right.
The remote control with
the Night mode and
Sleep timer button on
the right hand side,
in the middle, above
the Information menu
button.