Dyson purifier cool Gen1 User Manual

Looking after your machine
Error codes
Cleaning your machine
To always get the best performance from your Dyson purifying fan,
it’s important to regularly clean it and check for blockages.
If your machine is dusty, wipe with a damp lint-free cloth.
Look for blockages in the air inlet holes on the filter and the small
aperture inside the loop amplifier.
Use a soft brush to remove dust and debris.
Don’t use detergents or polishes to clean your machine.
If your machine shows an error code, try turning it off and then on again.
If this doesn’t clear the error code contact Dyson Customer Care.
For more information and support for your machine go online:
www.dyson.com/support

Dyson purifier cool Gen1 Specifications

General

Airflow	290 l/s
Air speed	1.2 m/s
Cord length	1.8 m
Sleep timer	Yes
Air purify rate	- m³/h
Number of speeds	10
Oscillation angle	350 °
Air purifiers functions	Fan, Heating
Noise level (low speed)	42.6 dB
Noise level (high speed)	61.4 dB
Timer duration (maximum)	8 h
Timer duration (minimum)	1 h
Suitable for room area up to	27 m²
Package depth	260 mm
Package width	257 mm
Package height	1103 mm
Package weight	6850 g
Battery type	CR2032L
AC input voltage	220 - 240 V
AC input frequency	50 Hz
Power consumption (max)	- W
Power consumption (standby)	1 W
Fine particle (PM2.5) numeric reading range	12 µg/m³
HEPA class	HEPA 13
Filter life (max)	12 month(s)
Display type	LED
Product color	White

Weight and Dimensions

Depth	120 mm
Width	204 mm
Height	1050 mm
Weight	4730 g
Remote control weight	25 g
Remote control dimensions (W x H x D)	32.2 x 10.49 x 90 mm