To release the dirt: Hold the machine over the bin in a downwards position. Firmly push the red bin release button.
The bin will slide down, cleaning the shroud as it goes and the bin base will open. The bin base won’t open if the red
bin release button isn’t pushed down all the way.
03. To minimize dust/allergen contact when emptying, cover the
clear bin tightly in a dust-proof bag while you empty. Remove the clear bin carefully from the bag. Seal the bag
tightly and dispose of. Be careful not to pull the power trigger while the clear bin is open for emptying. To close the
clear bin: Push the bin base upwards until the clear bin and bin base click into place.
Cleaning your bin
If it is necessary to clean your bin, empty the bin as shown in the ‘Emptying your bin’ section. Press the red button
located on the bin runner to release the bin and slide the bin off the runner. Clean the bin with a damp cloth only.
Make sure that the bin and seals are completely dry before replacing.
To refit the bin, insert the spine onto the bin runner. Close the bin by pushing the bin base upwards until the bin and
bin base click into place. The bin isn’t dishwasher safe and the use of detergents, polishes, or air fresheners to clean
To Next Page
Loading...
Need help?
General
