Washing your brush bar
To maintain optimum performance, check and wash your
brush bar regularly.
Make sure your machine is disconnected from the charger.
Remove your brush bar
Don’t put any part of your machine in a dishwasher or use detergents,
polishes or air fresheners.
Press the cleaner head release button on the end of the wand. Place the
cleaner head upside down.
Push the end cap up fully and pull the brush bar out of the cleaner head.
Remove the end cap from the brush bar. Don’t wash the end cap.
Slide your brush bar out of the cleaner head.
2
1
Wash and dry your brush bar
Hold your brush bar under running water and gently rub to remove any lint
or dirt.
Stand your brush bar upright as shown. Leave to dry completely for at least
24 hours.
Replace your brush bar
Before replacing, check that your brush bar is completely dry.
Reattach the end cap to your brush bar.
Slide your brush bar into the cleaner head. Push the end cap back down to
the closed position.
The cleaner head housing is not washable and should only be wiped over
with a damp lint-free cloth.
3
1
2
To Next Page
Loading...
