Dyson v12 origin - Clearing Blockages

Clearing blockages
Disconnect your machine from the charger before looking for blockages.
Leave your machine to cool down before looking for blockages.
Don’t use your machine when looking for blockages as this could
causeinjury.
If your machine detects a blockage, the motor will pulse and you won’t be
able to use your machine until the blockage has been cleared.
If you try to use your machine when the motor is pulsing, it will automatically
cut out.
Check the main body
Remove the bin and check for blockages in the main body of your machine.
Make sure any blockages are completely cleared and all parts are fitted
before using your machine.
Check the wand and cleaner head
Check the wand for blockages.
Check your cleaner head for blockages, following the instructions to remove
the brush bar, where necessary.
Reassemble your machine
Refit all parts securely before using your machine.
Clearing blockages isn’t covered by your guarantee.