E-Image GH03 - Adjusting Counterbalance and Tilt Drag; Adjusting Counterbalance; Adjusting Tilt Drag; Adjusting Pan Drag

L
lock
loose
6.Adjusting counterbalance
Loose the tilt locking knob. Hold the camera by securing the pan bar. Turn
the counterbalance dial to that number which can make camera remaining
in position with hands free.
I
lock
loose
7. Adjusting tilt drag
Loose tilt locking knob, turn the tilt drag dial to the required setting , then
slowly move the fluid head vertically until find your required drag
(PS: GH08 & GH08L are with fixed tilt drag)
J
lock
loose
8. Adjusting pan drag
Loose pan locking knob, turn the pan drag dial to the required setting , then
slowly move the fluid head horizontally until find your required drag.
Please make sure you always turn the dia to index number, NOT between
the two index, or it will damage the inner pins or disks .
(PS: GH08, GH08L are with fixed pan drag)
ADJUSTING COUNTERBALANCE & DRAG
ADJUSTING PAN DRAG
11 12