Daily maintenance:
Storage and transport:
When not using head for a long time, please turn all the knobs
to the minimum.
When not using tripod, please don’t place vertically to avoid
the broken
When not using tripod or transportation, please keep it in the
carry bag.
Function inspection:
Please check the tripod payload and head locking condition,
in order to avoid the accident
Please check and adjust tripod and head locking condition
regularly, in order to increase service life.
Cleaning & Maintenance:
1.Using a regular with a lint free cloth - to clean tripods.
2.Please keep it in carrying case if not use it for long time.
3 .Using a semi-stiffe brush or vacuum
Always engage safety locks and devices where applicable on the
products.
Don’t use product at temperatures less than -30 or more than 60.
sand from all locking threads and sliding segments.
Dry the product after use in wet conditions.
Cleaning with mild detergent and a soft cloth. Remove dust and
IMPORTANT:Not recommended to use in seawater
If any questions during using process, please read the instruction
carefully or ask help from your local distributor.
In the event on the product becoming defective, the unit should be
returned to an authorized E-IMAGE service agent.
Maintenance
Notice & Warning
25 26
To Next Page
Loading...