E-Net E-P132-X - Key Serial Ethernet Converter Features

8
Product Features
□
□
□
Data Conversion between RS-232/422/485 and Ethernet
Convert serial device (RS-232, RS-422, RS-485) data/signal into TCP/IP
packet data/signal and send them out with Ethernet data stream or convert the
TCP/IP packet data/signal into serial device data/signal.
□
□
□
Dynamic IP Configuration
Support DHCP client mode, simplifying network address configuration and
management.
□
□
□
Dual LAN Speed
Support 10/100 Mbps Ethernet, auto-detected.
□
□
□
Server / Client Dual Modes
ARM-7 Series can be configured as network server or network client. In client
mode, it can be installed in network which protected by NAT router or firewall,
without the need of a real IP address.
□
□
□
Web-based Setup
Parameters setup based on HTTP protocol by using standard browsers (IE and
Netscape). No special software would be required.
□
□
□
Built-in Security Control
Protected setup the password to prevent intruders.
□
□
□
Firmware Remote Update
Firmware can be updated directly via Ethernet network to keep up with latest
network standards.