WARNING
ASSEMBLY / DISASSEMBLY OF MUDGUARDS
Make sure that the Balance Bike is in the "parking"
position (kickstand in the open position, on a flat, sloping
or uneven surface), that the charger is unplugged and
that the Balance Bike is off (off).
WARNING
Be sure to follow the user manual and settings described
in this manual.
It is important to prevent any mounting errors.
Unpack the mudguards, the smaller one is fixed at the front
using the screw and nut provided, the larger one is fixed at the
back using the screw and the nut provided.
Front fender mounting :
Rear fender assembly :
To Next Page
Loading...
