BRAKING TEST
Raise the balance wheel, manually turn the wheel
corresponding to the brake you just adjusted.
While the wheel rotates, operate the brake handle, stopping
wheel rotation should be instantaneous.
If the stop is not immediate, braking will not be optimal.
Repeat the procedure.
BRAKE HANDLE
MUST NOT TOUCH
THE HANDLE OF THE HANDLEBAR.
ii) Brake Caliper Adjustments
When dismounting the front or rear wheels, it is essential
to adjust the brake calipers.
To adjust the disc and brake calipers, use the supplied key.
The disc must be perfectly aligned between the pads as below.
You can check by looking over the stirrup.
To Next Page
Loading...
