E-Slide ES1200D - Battery & Voltage

Page25
IMPORTANT FOR COMPLETE LOAD
The VOL indicator on the digital display must be at 42 in
order for the charge of the balance bike to be complete.
- Once connected, check the digital display for
BATTERY & VOLTAGE charge levels:
- To disconnect after charging, please disconnect the
power cable from the 220V socket.
- Then disconnect the charging cable (photo n ° 3 / p26).
- Close the waterproof plug of the charging port and
close the charging port cover (photo n ° 1 / p26).
Photo n°1
Photo n°2
Version 01
Photo n°3
3
1
2
Photo n°2
Version 02
1 - Press 2 X on the Function button
of the digital display
2 - The VOL indication will appear in
place of ODO. The balance bike
should be 42 for a full charge.
3 - Check that the load bars are
complete.