WARNING STARTING
Make sure that the Balance Bike is in the "parking"
position (kickstand in the open position, on a flat, sloping
or uneven surface), folding ring, safety pin, tightening ring
tightly closed, that the loader unplugged and the Balance
Bike is off (off).
Front / rear lighting: press the RED button on the left of the
handlebar for 3 seconds to switch on the headlights. A second
press of 3 seconds on this push button will turn off the front
and rear lights.
NB: If you turn off the balance, the headlights will turn off
automatically.
Brake / rear lighting: the action on either brake handle will
flash the rear light.
v) Buzzer
The red horn button on the left side of the handlebars will
allow you to signal your presence to others.
vi) Start / Driving
1. Sit on the saddle of the balance bike.
2. Put your Balance Bike in the On position.
3. Raise the kickstand and place both feet on the ground to
maintain stability (stability) before starting.
To Next Page
Loading...
