WARNING START UP
Make sure that the Balance Bike is in the "parking"
position (kickstand in the open position, on a flat, sloping
or uneven surface), folding ring, safety pin, tightening ring
tightly closed, that the loader unplugged and the Balance
Bike is off (off).
The balance bike must be placed in "parking" position on
a flat surface, neither sloping nor uneven.
ii) Turning on / turning on the balance bike
To turn on your balance bike you have to activate up the ON button
on the left of the handlebar with the pictogram , the button will
remain in the up position.
On power-up, an electronic anti-start system will prevent you
from operating the accelerator during the lighting of the
balance bike as follows:
- Press the power button
*** Start-up security ***
- The digital display turns on.
*** End of boot safety ***
To Next Page
Loading...
