EasyManua.ls Logo

E-Slide ES1200D - Battery Charging Process

E-Slide ES1200D
45 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Page24
WARNING OF CHARGING
Make sure that the Balance Bike is in the "parking"
position (kickstand in the open position, on a flat surface,
neither sloping nor rough), that the Balance Bike is off
(off). DO NOT ABSOLUTELY TURN THE DRAISIAN ON
DURING THE LOAD CYCLE, that the Balance Bike is in a
dry place, away from the sun, rain, that the Balance Bike
and the charging port are completely dry, do not use a
standard 220Volt outlet.
c) Charge the battery of the balance bike
i) Description of the charging of the batterye
- Connect the power cable to the charger.
- Open the charging port cover and the charging port
sealing plug (photo # 1 / p26).
- Connect the charger cable with the male charging port
to the charging socket on the balance machine (photo #
2 / p26 - version 01 or 02 depending on the type of
connection of your product).
- Connect the power cable to the standard 220Volt
socket (photo n ° 3 / p26).
220V

Related product manuals